How to plan a garden irrigation system
Drip and micro irrigation puts water where the roots are, wasting less than a sprinkler. Here is how to plan a basic layout.
Sketch the garden
A rough drawing of beds, pots and the tap makes the shopping list easy.
Zones
Group plants with similar needs together.
Why it matters
Vegetables need more water than established shrubs.
Tip
Start with one bed and expand later.
Choose emitters
Drippers give a slow trickle at one point, mist emitters cover a wider area.
Greenhouses
Mist emitters help seedlings and humidity-loving plants.
Tip
Check each emitter after the first run.
Connect and test
Run clean water through the line before you add emitters.
Fittings
Use tees and end caps to build branches and close the line.
Leaks
Push tube fully onto barbs and replace any kinked tube.
Tip
Add a timer to automate watering.
Frequently asked questions
Is drip irrigation hard to fit?
Basic kits push together without tools.
Can I use mains pressure?
Check the kit instructions; some need a pressure reducer.
How long should I run it?
Start with short runs and adjust to how quickly the soil dries.
Shop the range
Browse our Irrigation Kits & Drip Systems or all products. Code WELCOME10 gives 10% off.
